V-PRO s2 Low Temperature Sterilization System | STERIS
STERIS Corporation - Helping to provide a healthier today and a safer tomorrow.

V-PRO® s2 Low Temperature Sterilization System

  • Delivers maximum productivity and maximum flexibility needed to meet Sterile Processing Department (SPD) and Operating Room (OR) demands
  • Process up to 4 lb (1.8 kg) of non-lumened and lumened devices in only 19 minutes with the exclusive Fast Cycle
  • Easily fits in space-constrained Sterile Processing Departments (SPDs) at less than 2 feet wide
  • Save time and costs with mixed load capabilities in the Fast and Flexible Cycles, letting you run 2 cycles in 1

REQUEST A QUOTE

The V-PRO s2 Low Temperature Sterilizer delivers the right cycles to meet your SPD’s demands, while fitting in the tightest spaces of your department at just 22 ½" wide. This small low temperature sterilizer also offers a 19-minute cycle for quick turnaround of devices.

How the V-PRO s2 Low Temperature Sterilization System Works

The V-PRO s2 Low Temperature Sterilization System is a vaporized hydrogen peroxide (VHP) sterilizer that uses VAPROX® HC Sterilant and provides terminal sterilization of properly prepared (cleaned, rinsed and dried) medical devices. This compact sterilizer offers pre-programmed Cycles (Lumen Cycle, Non Lumen Cycle, Fast Cycle and Flexible Cycle) that operate at low temperature, processing medical devices without leaving toxic residues.

  • Fast Cycle – Process mixed loads up to 4 lbs. of non lumen instruments or 8 single, double and triple channel stainless steel lumens in a 19-minute cycle
  • Non Lumen Cycle – Process up to 25 lbs. of non lumen devices in 28 minutes
  • Flexible Cycle – Process in a single cycle 1 single or dual flexible scope, lumen ≥ 1mm and ≤ 990mm, and up to 11 lbs. of short stainless steel lumens or non-lumened instruments
  • Lumen Cycle – Process Up to 11 lbs. of single, double and triple channel stainless steel lumens in 60 minutes

Please refer to the Operator Manual for detailed lumen dimension information and how to identify devices for loads.

Why Choose the V-PRO s2 Low Temperature Sterilization System?

  • Size: At just 22 ½" wide, the compact V-PRO s2 Sterilizer can easily fit into space-constrained locations.
  • Throughput: Faster VHP sterilization cycles and more flexibility than any other small low temperature sterilizer on the market.
  • Compatibility: V-PRO Sterilizers work with the widest range possible of medical devices and materials – 87% more device materials than the leading competitor.
  • Safety: Innovative foot sensor makes hands-free loading quick, safe and easy. V-PRO Sterilizers are designed with numerous safety features, and STERIS considers established OSHA and AAMI Standards in developing our IFUs and making safety recommendations. Click Here to Learn about V-PRO Safety Features.
  • Instructional Videos: The V-PRO s2 Sterilizer makes tasks simpler, easier to train staff and stay compliant with instructional videos available on the sterilizer screen.

Electronic Record Management with ConnectAssure™ Technology

Seamlessly connect and get immediate results from your V-PRO s2 Low Temperature Sterilizer, and Celerity HP BI Incubator with ConnectAssure Technology. Whether data is sent to your facility's tracking system or the ConnectAssure application, your cycle information including BI results are available with the click of a mouse for essential compliance reporting.

Sterilizer Dimensions, Chamber Size and Utility Requirements

Overall Sterilizer Dimensions are 22 ½" Wide x 32 ⅞" Deep x 61 ½" Tall. Chamber Size is 13" x 28" x 10" with 2.1 cubic feet of volume. V-PRO Sterilization systems require no plumbing, special ventilation or air supply, only a dedicated electrical connection is needed.

Device Compatibility Matrix

Confirm that your medical devices and accessories are compatible for processing with our
Low Temperature Systems.

SEARCH FOR MY DEVICES

Commonly Searched Devices Validated for Use in V-PRO Sterilizers

Olympus®
Device Type Model
Bronchoscopes BF, such as BF1T60
Cystoscopes CYF, such as CYF V2
Pleuroscope LTF, such as LTF VH1
Karl Storz®
Device Type Model
Ureteroscope 11278au1
Rhino Pharyngoscope 11101RP2
C-Mac Intubation Fiberscope 11302BD2
Fiberscope  
Stryker®
Device Type Model

HD Cameras
System 7 set
 
 

1488-010-000
Sternum saw
7207-000-000

Medline®
Device Type Model
Sterilization Wraps Various
Cardinal Health™
Device Type Model
Sterilization Wraps Various
Halyard Health®
Device Type Model
Sterilization Wraps Various

Do you have a device from the following manufacturers? Visit the V-PRO Device Matrix to find out if your device can be reprocessed in a V-PRO Low Temperature Sterilization System.


  • Aesculap
  • Arthrex
  • BK Ultrasound
  • Brainlab
  • Braun
  • Cardinal Health
  • Fisher & Paykel
  • GE Healthcare
  • Hitachi Aloka
  • Intuitive Surgical
  • Karl Storz
  • Kimberly-Clark
  • Medline
  • Medovations
  • Mizuho
  • Olympus
  • Philips
  • Richard Wolf
  • St. Jude Medical
  • Stryker
  • Teleflex
  • Truphatek
  • Volk
  • WelchAllyn

SEARCH FOR MY DEVICES

What can the V-PRO s2 Low Temperature Sterilizer sterilize?

Non-lumened instruments including non-lumened general medical instruments, non-lumened rigid, semi-rigid and flexible endoscopes. Confirm that your medical devices and accessories are compatible for processing with our Low Temperature Systems.

What is the V-PRO s2 Sterilizer’s fastest cycle?

The exclusive Fast Cycle can sterilize up to 4 lbs. of non-lumened instruments and single, double, and triple channel stainless steel lumens.

What does the V-PRO s2 Low Temperature Sterilization System consist of?

The V-PRO s2 Low Temperature Sterilization System consists of several components. These components include:

  • The V-PRO® s2 Sterilizer
  • VAPROX® HC Sterilant with RFID label
  • Celerity™ 20 HP Biological Indicator
  • VERIFY™ V24 Self-Contained Biological Indicator
  • Celerity™ 20 HP Biological Indicator Challenge Pack
  • VERIFY™ V24 Challenge Pack
  • Verdoc™ Vaporized VH202 Record Card with Process Indicator
  • V-PRO® and PRO-LITE™ Sterilization Trays, Instrument Organizers, and Silicone Mats
  • Vis-U-All™ Low Temperature Sterilization Pouches and Tubing

What is the difference between STERIS’s V-PRO Low Temperature Sterilization Systems?

Explore the differences between V-PRO Sterilizers and other common VHP Sterilizers based on important factors like chamber size, cycle time, utilities, electronic record keeping capabilities, and more using our interactive tool.


Sterility Assurance Monitoring & Packaging Accessories

Celerity 20 HP Biological Indicator

  • Provides a final read within 20 minutes of incubation
  • For use with all V-PRO Low Temperature Sterilization System models

VERIFY® VH2O2 Indicator Tape

  • Made to secure instrument loads wrapped in synthetic wrap material
  • Indicator ink provides immediate identification of processed packs in V-PRO® and STERRAD® Sterilizers

Celerity HP Chemical Indicator

  • Scannable barcode for easy entry into tracking software
  • For use in both V-PRO® Low Temperature Sterilization Systems and STERRAD Models*

PRO-LITE Sterilization Trays

  • Optimize V-PRO® Sterilizer chamber space
  • Up to 25 lbs. (11.3 kg) weight capacity per tray

Connectivity

SPM® Surgical Asset Tracking Software

  • Surgical instrument tracking system to ensure you’ll have the right equipment delivered on time
  • Provides Sterile Processing Technicians with step-by-step instructions to deliver consistent, quality results

ConnectAssure Technology

  • Digital data management system that collects cycle information from STERIS equipment and securely connects it to the hospital instrument tracking system
  • Aids in record keeping and workflow management

View, download and print technical information for V-PRO s2 including CAD Blocks, Revit Family Objects, equipment drawings, technical data sheets, and more on the STERIS Architect Portal.

ACCESS DESIGN RESOURCES
OPERATORS MANUAL
Document # Document Title
V-PRO S2
V-PRO S2 LOW TEMPERATURE STERILIZATION SYSTEM
V-PRO S2 LOW TEMPERATURE STERILIZATION SYSTEM
V-PRO S2 LOW TEMPERATURE STERILIZATION SYSTEM
V-PRO S2 LOW TEMPERATURE STERILIZATION SYSTEM
V-PRO S2 LOW TEMPERATURE STERILIZATION SYSTEM
V-PRO S2 LOW TEMPERATURE STERILIZATION SYSTEM
V-PRO S2 LOW TEMPERATURE STERILIZATION SYSTEM
V-PRO S2 LOW TEMPERATURE STERILIZATION SYSTEM
V-PRO S2 LOW TEMPERATURE STERILIZATION SYSTEM
V-PRO S2 LOW TEMPERATURE STERILIZATION SYSTEM - OPERATOR MANUAL (JA)
TECH DATA SHEET
Document # Document Title
V-PRO S2 LOW TEMPERATURE STERILIZATION SYSTEM
TECHNICAL MONOGRAPH
Document # Document Title
V-PRO S2 LOW TEMPERATURE STERILIZATION SYSTEM
MONOGRAPHIE DES DONNÉES TECHNIQUES - SYSTÈME DE STÉRILISATION À BASSE TEMPÉRATURE V-PRO S2
WALL CHARTS
Document # Document Title
PACK MONITORING WALL CHART
V-PRO S2 CYCLE WEIGHT GUIDE
SELL SHEET
Document # Document Title
INFOGRAPHIC- V-PRO BEATS STERRAD WITH A 1-2 PUNCH
V-PRO TRAYS SELL SHEET
BROCHURE
Document # Document Title
V-PRO FAMILY BROCHURE
V-PRO S2 BROCHURE
V-PRO S2 BROCHURE
V-PRO S2 BROCHURE
SAMPLE PROCEDURES
Document # Document Title
ROUTINE MONITORING OF V-PRO STERILIZERS WITH CELERITY 20 HP BIOLOGICAL INDICATORS SAMPLE PROCEDURES
QUALIFICATION TESTING OF V-PRO STERILIZERS FOLLOWING INSTALLATION OR MAJOR REPAIR
Live Chat

 

salesperson

Enter Your Zip Code to Locate Your Sales Representative

Zip Code is required.
Go to Top of Page