STERIS Certified Pre-Owned AMSCO™ 400 Medium Sterilizer
- Brand: STERIS
- Key Features: Processes up to fifteen 25lb trays per cycle in the 60" unit
- Productivity: Fully programmable cycles to satisfy instrument manufacturer processing recommendations
Product Overview
The STERIS Certified Pre-Owned AMSCO 400 Medium Sterilizer (autoclave) is tailored for the rigorous needs of Sterile Processing Departments (SPDs). This medium-sized autoclave can safely sterilize up to 375 lbs. per cycle, enabling efficient management of high-volume sterilization and heavier trays while adhering to compliance standards.
- Available in three chamber lengths: 36", 48" or 60" chamber
- Install recessed in the wall or free-standing with cabinet
- Safe access to all components from the front and left side of the sterilizer
- Real-time remote monitoring of sterilizer function and cycle parameters with ConnectCare℠
- Preventive maintenance and comprehensive service agreements
The STERIS Certified Pre-Owned (CPO) AMSCO 400 Medium Sterilizer repaired option undergoes a precise STERIS certification process. STERIS CPO technicians thoroughly inspect and refurbish each unit to provide and ensure it meets STERIS specifications to be like-new aesthetically and operationally.
AMSCO™ 400 SERIES MEDIUM STERILIZER
WITH MANUAL HINGED DOOR
AMSCO™ 400 SERIES MEDIUM STERILIZER
WITH AUTOMATED HORIZONTAL SLIDING DOOR
Interior Chamber Dimensions, available in three chamber lengths:
- 26 x 37.5 x 36" (660 x 950 x 910 mm) – 570.56 liters
- 26 x 37.5 x 48" (660 x 950 x 1220 mm) – 764.94 liters
- 26 x 37.5 x 60" (660 x 950 x 1520 mm) – 953.04 liters
- Re-Insulate Chamber
- Replace steam manifold
- Replace heat exchanger Assy
- Replace jacket trap
- Replace pressure regulator
- Replace exhaust manifold
- Replace the check valve
- Temperature and pressure calibration
- Verify door operation
- Check relays and contactors for arc damage
- Replace conductivity/ float probes
- Re-finish all stainless-steel panels or replace them if needed
- Replace vacuum pump
- Replace water inlet
- Replace the safety valve
- Replace jacket trap check valve
- Replace the feed water valve
- Check chamber level sensor
- Check appearance for leaks and damage
- Replace chamber strainer
- Replace steam baffle
There are no literature documents found for this product.
