V-PRO™ maX 2 Low Temperature Sterilization System

Product Overview

Delivering unparalleled productivity for day-to-day Operating Room needs, the V-PRO maX 2 Low Temperature Sterilization System is designed for use in the terminal sterilization of medical devices. STERIS’s V-PRO maX 2 Sterilizer features the Fast Non Lumen cycle, allowing you to sterilize devices like cameras, telescopes, batteries, and laryngoscope blades in just 16 minutes.

How V-PRO maX 2 Low Temperature Sterilization System Works

This Low Temperature Sterilization System using proprietary Sterilant is intended for use in the terminal Sterilization of properly prepared (cleaned, rinsed, and dried, refer to Cleaning, Rinsing, and Drying in the Operator's Manual) medical devices in Healthcare Facilities. The preprogrammed Sterilization Cycles operate at low pressure and temperature, suitable for processing medical devices without leaving toxic residues.

The V-PRO maX 2 Sterilizer offers five cycles to efficiently sterilize the widest range of surgical instruments and medical devices using our proprietary vaporized hydrogen peroxide technology:

Cycle	Lumen†	Non Lumen	Flexible†	Fast Non Lumen	3D Specialty Cycles
†Refer the operator manual for lumen size limitations. *da Vinci is a registered trademark of Intuitive Surgical, Inc.
Cycle Time	52 Minutes	28 Minutes	35 Minutes	16 Minutes	Varies
Load Weight	19.65 lb/8.9 kg	50 lb/22.7 kg	2 Scopes | 24 lb/11 kg: 1 scope and Non Lumened and Short Lumened Devices	11 lb/5 kg, Non Lumened Devices Peel Pouch Only	For Cycle Details, Please Click Here
Device Examples	Orthopedic Drill Camera daVinci® Endoscopes* Batteries Lumened Rigid Endoscopes Telescopes	Light Cord Camera daVinci® Endoscopes* Batteries Non Lumened Rigid and Flexible Endoscopes Telescopes	Light Cord Camera daVinci® Endoscopes* Batteries Lumened Flexible Endoscopes Telescopes	Light Cord Camera Batteries Non Lumened Flexible Endoscopes Telescopes	Anatomical Models Patient Specific Surgical Guides

The innovative Moisture Check is included in every cycle to help confirm loads are dry and prevent cycle aborts. The Fast Non Lumen Cycle, only available with the V-PRO maX 2 Sterilizer, uses half the sterilant compared to all other V-PRO Sterilizer cycles.

Why V-PRO maX 2 Low Temperature Sterilization System?

• maX Compatibility – Setting the standard of processing the widest range of medical devices and materials. Including 3D printed devices
• maX Throughput – Process 11 lbs. (5 Kg.) of non lumened devices in 16 minutes, or process 50 lbs. of non lumened devices in 28 minutes
• maX Ease – Simple, intuitive cycle selection via large icons makes training and day-to-day use easy. Hands-free chamber access with an integrated foot pedal makes loading quick and easy
• maX Simplicity – A line of dedicated consumables, including sterilant, biological indicators, chemical indicators, and tape, to enable packaging and processing steps
• maX Savings – VAPROX HC Sterilant Smart Cup technology notifies you of remaining sterilant and cup expiration to help reduce waste

Specifications

• Overall Sterilizer Dimensions: can be installed recessed or with a cabinet package
• Cabinet (DD): 33 x 72 x 40-15/16" (838 x 1829 x 1040 mm)
• Recessed/Cabinet (SD): 33 x 72 x 38-5/16" (838 x 1829 x 973 mm)
• Chamber Size is 17 x 15 x 32-1/2" (432 x 381 x 826 mm) with 4.8 cubic feet (136 L) of volume
• Utility Requirements - no plumbing, special ventilation, or air supply. Only a standard 20amp dedicated wall outlet is needed

Device Compatibility

Confirm that your medical devices and accessories are compatible for processing with our Low Temperature Systems.

SEARCH FOR MY DEVICES

Commonly Searched Devices Validated for Use in V-PRO Sterilizers

Visit the V-PRO Device Matrix to find out if your device can be reprocessed in a V-PRO Low Temperature Sterilization System. The Device Matrix contains information on devices from hundreds of manufacturers including:

SEARCH FOR MY DEVICES

Connectivity and Electronic Record Management with ConnectAssure™ Technology

Seamlessly connect and get immediate results from your V-PRO maX 2 Low Temperature Sterilizer and Celerity Incubator with ConnectAssure Technology. ConnectAssure Technology Data Export software helps promote compliance throughout the facility by interfacing compatible STERIS products with SPM Surgical Asset Tracking Software and many of the other leading instrument tracking systems.

FAQs

What can the V-PRO maX 2 Low Temperature Sterilizer sterilize?

The V-PRO maX 2 Low Temperature Sterilizer can sterilize more than just instruments that are heat sensitive. Devices like batteries, rigid endoscopes, general stainless steel instruments, bronchoscopes, and others will benefit from short cycle times with a gentle, low temperature process.

How fast can the V-PRO maX 2 Low Temperature Sterilizer sterilize?

The V-PRO maX 2 Low Temperature Sterilizer has four cycles that range from very fast to extremely fast, with all cycles starting with a moisture checking condition phase included in the total time:

• The Lumen Cycle will process rigid lumened devices in around 52 minutes
• The Flexible Cycle will process flexible scopes in around 35 minutes
• The Non Lumen Cycle will process general stainless steel and non lumened devices, including da Vinci endoscopes, in around 28 minutes

For the fastest turn-around, the Fast Non Lumen Cycle will process general stainless steel and non lumened instruments in pouches or pouched trays in around 16 minutes.

What STERIS accessories are designed to work with the V-PRO maX 2 Low Temperature Sterilizer?

• Celerity™ HP Biological Indicators
• Celerity™ HP Challenge Packs
• Celerity™ HP Multivariable Chemical Indicator
• VAPROX™ HC Sterilant with RFID label
• Verdoc™ Vaporized VH2O2 Record Card with Process
• PRO-LITE Sterilization Trays, Instrument Organizers, and Silicone Mats
• Vis-U-All™ Low Temperature Sterilization Pouches and Tubing

What is the difference between STERIS’s V-PRO Low Temperature Sterilization Systems?

Explore the differences between V-PRO Sterilizers and other common VH2O2 Sterilizers based on important factors like chamber size, cycle time, utilities, electronic record-keeping capabilities, and more using our interactive tool.

Planning and Design

View, download, and print technical information for V-PRO maX 2, including CAD Blocks, Revit Family Objects, equipment drawings, technical data sheets, and more on the STERIS Architect Portal.

ACCESS DESIGN RESOURCES

Literature

Related Products