STERIS Corporation - Helping to provide a healthier today and a safer tomorrow.

Celerity Vaporized VH2O2 Process Indicator Adhesive Label

  • Adheres to wraps, trays, or pouches and shows at a glance if the item has been processed
  • For use in both V-PRO® Low Temperature Sterilization Systems and STERRAD Models*
  • Validated Type 1 process indicator and sterilization label for vaporized hydrogen peroxide sterilization

REQUEST A QUOTE

The Celerity Vaporized VH2O2 Process Indicator Adhesive Label, a Type 1 Process Indicator as defined by ANSI/AAMI/ISO 11140-1, is a vaporized hydrogen peroxide sterilization process chemical indicator and sterilization label. Easily distinguish between processed and unprocessed units when the sterilization indicator label is affixed to packs to be sterilized.

How the Celerity Vaporized VH2O2 Process Indicator Adhesive Label Works**

  1. Complete record keeping information on the chemical process indicator label (sterilization date, expiration date, quantity/contents, load number, operator initials)
  2. Remove the adhesive backing and place the sterilization label on the outside of the wrapped pack, or clear side of a pouch to be sterilized.
  3. Perform the sterilization cycle, and upon cycle completion, follow department procedure for load release.
  4. Confirmation of indicator performance should take place whenever the pack is forwarded to a new location, such as sterile storage or the Operating Room.
    • If the color matches the orange/yellow color reference or is lighter, the indicator label shows a pass result. Follow department procedure for load release.
    • If the color is magenta or any color other than orange/yellow, the indicator color does not meet the pass criteria as the indicator ink has not been exposed to the sterilization process or has failed to be exposed sufficiently to result in a passing condition. Follow department procedures for reporting sterilization failures.

Why Choose the Celerity Vaporized VH2O2 Process Indicator Adhesive Label?

  • Easily distinguish between processed and unprocessed units through a visible color change from magenta to orange/yellow or lighter
  • Make record keeping easy with external labeling and scannable barcode for entry into tracking software

Chemical Indicator Specifications

Sterilization Method

Vaporized Hydrogen Peroxide Sterilization

Product Type

Type 1 Chemical Indicator

Size

Approximately 4-5/16" (110 mm) long and 2-3/4" (70 mm) wide

Color Change

From magenta to orange/yellow (or lighter) 

SKU

PCC078, 1 Roll of 1,000 labels

Interpretation

unexposed

UNEXPOSED

pass

PROCESSED/PASS

fail

PROCESSED/REJECT

* As of 4/1/19 the Celerity HP Chemical Indicator has been validated for use in all cycles on the STERRAD 100NX, STERRAD NX and STERRAD 100S Sterilizers.

** This section enables the Customer to understand directions for use. Always refer to the directions that come with the product and adhere to all applicable safety precautions.

Other Sterility Assurance and Monitoring Products

Biological Indicators

  • For routine monitoring, product testing and qualification of steam, EO, and vaporized hydrogen peroxide sterilization processes

Chemical Indicators

  • Internal chemical indicator strips and challenge packs capture sterilization or disinfection failures through immediate results

Record Keeping and Labeling

  • Envelopes, forms, record cards and labels to quickly document common sterilization, high level disinfection and cleaning processes
Product Number Description  
PCC078 CELERITY VH202 ADHESIVE LABEL 1000/ROLL
TECH DATA SHEET
Document # Document Title
CELERITY™ VAPORIZED VH202 PROCESS INDICATOR ADHESIVE LABEL (PCC078)
BROCHURE
Document # Document Title
V-PRO CONSUMABLES BROCHURE
V-PRO CONSUMABLES BROCHURE
Live Chat
salesperson

Enter Your Zip Code to Locate Your Sales Representative

Zip Code is required.
Go to Top of Page