Calibration Chamber Cleaning Chamber Studies Installation Qualification/Operational Qualification Pre-installation Inspections Technology Upgrade Kits Technology and Resource Planning and Disposition Utility Analysis Welding Services

For more information on these services, send us an e-mail or contact STERIS at 800.333.8828.

Calibration
Our calibration service is designed to meet our customers specific calibration requirements while providing superior accountability, reliability, and expertise. The service begins when we meet with our customer to review the appropriate protocols and applications within the facilities. Upon agreement, we locate and identify the systems to be calibrated, establish a schedule, and create a document repository for the calibrations. The calibrations themselves can be completed using our standard protocols and documentation or a methodology you designate.

The service also provides an annual report on calibration activity and results. This report consolidates the calibration data in one easy-to-access document that references the original documentation held on site within the calibration repository.

Our Calibration Services include:

• Calibration to N.I.S.T. Traceable Standards
• Thorough Documentation
• Annual Review and Report
• Pre-scheduled Occurrence

For more information on this service, send us an e-mail or contact STERIS at 800.333.8828.

Back To Top

Chamber Cleaning

This innovative sterilizer cleaning method utilizes a combination of mechanical and chemical actions to remove green, black, and brown residues from the inside of chamber walls. This periodic process provides an aesthetically pleasing finish without the messy, potentially destructive action from other cleaning methods such as bead blasting or polishing and grinding.

This method allows the sterilizer to remain in place, eliminating the need to remove the unit. It is minimally invasive, and cleaning can be performed either during normal working hours or during off-peak hours.

This patented process utilizes a revolutionary combination of alkaline and acid detergent cleaners, along with a specialized articulating spray nozzle. Residuals are collected in a filter cartridge, and detergent cleaners are effectively neutralized for safe disposal.

Benefits

• Provides an aesthetically pleasing sterilizer interior.
• Environmentally friendly; detergent cleaners used in process are neutralized for safe and easy disposal
• Service can be provided to any location in the hospital where 110-volt, 20-amp power is available.
• Quick, three-to five hour start-to-finish process can be performed during off-peak hours.
• Rack/shelves on 16” and 20” units are cleaned along with chamber.
• Supports daily/weekly operator cleaning guidelines with periodic process.

Applications
Service applies to the following equipment:

• 16” x 16” Radial Arm Door Sterilizers – Amsco Eagle® 3000, Amsco Eagle 2000, Medallion
• 20” x 20” Radial Arm Door Sterilizers – Amsco Eagle 3000, Amsco Eagle 2000, Medallion
• 24” x 36” Medium Radial Arm Door Sterilizers (All Chamber Depths) – Amsco Eagle 3000, Amsco Eagle 2000, Medallion
• 16” x 20” Sliding Door Century Sterilizers
• Amscomatic Washers/Sterilizers
• Loading equipment for medium-size units can be cleaned for additional fee.

View Chamber Cleaning Video.

For more information on this service, send us an e-mail or contact STERIS at 800.333.8828.

Back To Top

Chamber Studies
STERIS Heat Distribution Studies are used to verify the proper operation and temperature reproducibility of steam autoclaves. During the studies, we identify and document temperature deviations upon the stabilization of empty test chambers. The empty chamber studies are conducted using a means of three consecutive cycles, in accordance with established and documented protocols.

Our Heat Distribution Studies are performed by a certified STERIS engineer, with the final results documented and delivered in a Heat Distribution Study report.

For more information on this service, send us an e-mail or contact STERIS at 800.333.8828.

Back To Top

Installation Qualification/Operational Qualification

STERIS’s IQ/OQ service documents the proper installation and site operations for new or relocated equipment. Through this service, we verify all operating cycles and alarms, documenting any adjustments needed to ensure your equipment performs to factory specifications. Our IQ/OQ service is equipment model-specific and includes the appropriate documentation assuring all pertinent parameters are met.

Our IQ/OQ service is performed by a certified STERIS engineer, with the final results documented and delivered in a bound IQ/OQ report.

For more information on this service, send us an e-mail or contact STERIS at 800.333.8828.

Back To Top

Technology Upgrade Kits
Control technology continues to evolve. STERIS customers can further enhance their investment in our systems with our Technology Upgrade Kits.

Control platforms are not the only areas that continue to evolve. Advances and new accessories, including motion sensors, dispensers, and a variety of new parts kits can add considerable operational value to your older equipment.

Technology Upgrade Kits are available for:

• Amsco® Steam Sterilizers
• Amsco® Washers
• Amsco® Warming Cabinets
• Amsco® Scrub Sinks
• Amsco® Surgical Tables
• Amsco® Carts and Ancillary Products
• Amsco® Laboratory Steam Sterilizers
• Amsco® Laboratory Glass Washers
• Amsco® Cage and Rack Washers
• Amsco® GMP Washers
• Finn-Aqua® GMP Sterilizers
• Finn-Aqua® GMP Steam Generators
• Finn-Aqua® GMP Pure Water Systems

Our Technology Upgrade Kits include:

• Modern Control Technology
• Optimum System Performance
• Factory Quality Assurance
• Original Device Specifications
• Full Factory Warranty

For more information on this service, send us an e-mail or contact STERIS at 800.333.8828.

Back To Top

Welding Services
STERIS Assent offers professional welding services that follow specific protocols and includes appropriate documentation. Our welding of pressure vessels meets the specifications of the American Society of Mechanical Engineers.

For more information on this service, send us an e-mail or contact STERIS at 800.333.8828.